On land and sea, keeping bacteria at bay. Use Selective Micro products to keep your RV or boat as clean and odor free as it was in the showroom.
Microorganisms, mold, mildew and algae can cause significant damage—and bring serious health risks—to boats and recreational vehicles of all kinds. Rely on Selective Micro products to sanitize water and waste systems, and eliminate odors and remove contaminants from surfaces. A powerful biocide, Selective Micro products' discharge complies with Federal regulations.
Applications include:
- Waste system odor control
- Mold and algae removal and control
- Drinking water system disinfection
- Recreational and camping water system decontamination
Usage Example
Using Selective Micro products to keep your boat or RV is simple and easy. For water or waste systems, simply add water and wait for the product to generate. Add the generated product into the water or waste system. The amount of product and contact time will depend on the size of the system and how long since the last cleaning. When done, simply flush the system—only one time, and enjoy a completely sanitized system. On surfaces, clean as you normally would then simply spray Selective Micro on kitchen and bathroom surfaces and know that they are sanitized and microbe free. For boat and RV owners we recommend the 2L500 product.
FAQ’s
Chlorine dioxide use continues to grow due to its anti-microbial properties and neutral pH. Still there are many questions regarding its use and properties. Here are just a few of the most commonly asked questions and the answers.
What does Selective Micro make?
- Selective Micro products are nearly pure (>99.9%) solutions of chlorine dioxide in water. Selective Micro products are generated via patented micro-reactor technology, designed to produce a specific amount of chlorine dioxide simply by adding water.
How do I use Selective Micro products?
- Selective Micro products come in the form of a self contained pouch or a sachet. Simply add water to the pouch to generate a specific volume and concentration or add a sachet directly to your volume of water. Activate and use Selective Micro Clean according to directions on pouch label. Introduce Selective Micro Clean into the tanks and lines, then soak and flush. It all comes down to concentration and contact time.
Why use Selective Micro Clean over alternative treatments?
- Selective Micro products are an effective, non-corrosive and quick rinsing alternative to other decontamination agents on the market today. Chlorine dioxide has more capacity to remove organic matter. In addition, because it is more selective to key organics, it is less corrosive to system components prone to oxidation. Because the chlorine dioxide is actually a pure gas in water, it will rapidly rinse from the system leaving no residue, typically with less than one volume of rinse water.
Why should boat owners be concerned about tank fouling?
- Taking action to achieve quality water treatment will minimize the levels of exposure to potentially harmful bacteria such as E-coli, legionella, salmonella and other organisms, which can cause cholera, diarrhea, typhoid, and dysentery.
Has chlorine dioxide been used before?
- Chlorine dioxide has been recognized as an effective biocide for decades, and is used in a range of hygiene-related applications worldwide. Municipal water systems, for example, have used chlorine dioxide to treat drinking water for over 50 years.
Why couldn’t I use chlorine dioxide before?
- Prior to the introduction of Selectrocide® in 1999, complicated, expensive mechanical generators or relatively impure “stabilized” solutions were the only ways to make chlorine dioxide. Shipping chlorine dioxide in non-frozen forms was and is prohibited. The expense of complex capital equipment, the corrosiveness of the lower-quality “stabilized” solutions, and the shipping limitations inhibited the development of many professional and consumer point-of-use applications. Now, using Selectrocide®, nearly pure (>99.9%) chlorine dioxide can be generated at the point-of use—without capital-intensive equipment.
What is the shelf life of Selective Micro products?
- In the unopened package, Selective Micro products have a shelf life of two years. Once the product is activated, use the Selective Micro solution within 15 days. Store activated solution according to instructions on label.
Will Selective Micro products damage my equipment?
- No. At recommended concentrations our products are extremely compatible with materials with a neutral pH.
Is there a test for concentration of Selective Micro chlorine dioxide?
- Chlorine dioxide is easily detectable. For quick on-site verification, Selective Micro offers test strips that quickly and accurately detect concentration and the rinse-out threshold.
Testimonials
Content to come...
